Table 1 Settings for flap creation
Settings | Flap cut | Flap side-cut |
|---|---|---|
Spot distance (μm) | 4.5 | 2.0 |
Track distance (μm) | 4.5 | 2.0 |
Scan direction | Spiral in | NA |
Scan mode | Single | NA |
Energy offset | 27 | 27 |
Flap diameter (mm) | 8.0 | NA |
Hinge position | 90° | NA |
Hinge angle | 50° | NA |
NA not applicable | ||